產地類別	進口

用于雙光子顯微鏡的電光調制器系統

Conoptics是光學和激光附件制造業的，開發了一套用于多光子顯微鏡的電光調制器。

多光子熒光顯微鏡結合了*進的激光掃描顯微鏡技術，使用紅外波長獲取更高分辨率的三維圖像，多光子熒光顯微鏡是非常實用的研究工具。

Conoptics調制器采用KD*P晶體，光束從中心入射，中心出射，標準的波長范圍從700nm到1100nm。電源使用Model 302RM，擁有1us的上升和下降沿的時間，可作為一個250KHz高速開關，并且可作為一個強度調制器。
用于雙光子顯微鏡的電光調制器系統
調制器參數：

Aperture	3.5mm
Dimensions	50mm Diameter * 135mm
Transmission	>90%
Standard Wavelength Ranges	700-1100nm
Piezo Resonances	Minimal with clamped version(BK option)
Driver Compatibility	Full modulation with M302 Power Amplifier up to 1064nm

放大器參數：

Cabinet	Driver and power supply in single cabinet
Test Feature	Built-in test feature allows testing for max transmission of Pockel Cell with out adjusting bias voltage
DC Bias	Improved DC biasing of Pockel Cell provides greater linearity at higher bias voltages
Voltage Range	+/- 450VDC controlled by ten-turn front panel pot. Digital meter monitors differential bias applied to E.O. Modulator
Linearity	10bits referenced to full scale (.1%)
Bandwidth	DC to >200Khz with 90pf load and 3M (RG-62) cables
Max. Output Drive Level	750VP-P into 90pf load
Amplifier Input Signal	2VP-P max into 50/1K ohms delivers 750VP-P out
Input Signal Format	Options include Unipolar positive, negative or bipolar
Input Power (AC)	60W typical. Input power is both load (modulator) and frequency dependent.
Dimensions	19” Rack Mountable, 5.25”H(133mm) (3U) x 14”D (356mm)
Cooling	Forced air
Operating Environment	Designed for laboratory use (indoor only) Temperature range +5deg C to +50deg C ambient Humidity 20%-80% RH up to 32deg C Altitude <3000M
Weight	20lbs (9.07kg)

用于雙光子顯微鏡的電光調制器系統

用于雙光子顯微鏡的電光調制器系統

留言框

產品：

您的單位：

您的姓名：

聯系電話：

常用郵箱：

省份：

詳細地址：

補充說明：

驗證碼：